Better Built Trailers

Specifications

• 2023 Timpte Roughneck 39’ 0” L x 66" H
• Year2023
• ManufacturerTimpte
• Model NameRoughneck
• Trim Name39’ 0” L x 66" H
• Generic Type (Primary)Hopper / Grain
• DimensionsDry loose sand angle of repose: approximately 33 degrees | Support Legs: Located 94” from Kingpin. | Hopper clearance 25”.
• Kingpin Setting20”- Single I-beam Aluminum coupler with enclosure
• Width96 in. | Single standard AG door: 26”
• Length39 ft. | Single standard AG door: 24”
• Height66”
• Capacities
• Payload Capacity28 ton payload based upon 7,900 lb trailer, 16,100 lb tandem tractor and 80k GVW (Interstate System) | 31 ton payload based upon 7,900 lb trailer, 14,100 lb tandem tractor and 84k GVW (Texas w/ permit)
• Volume720 cubic feet “usable sand volume” 850 cubic feet heaped | Based upon 100 lbs/cubic feet 70/40 mesh dry sand 86 lbs / cubic feet 100 mesh dry sand | To accommodate use back into the grain market with approximately 1,100 cubic feet capacity
• Cargo CapacitySupport Legs: 50,000 lbs. lift | Heaped 9" AG 96" width: 750 FT3 | Water Level AG 96" width: 650 FT3
• Weights
• Weight8,400 – 9,200 lb max
• Electric
• ElectricalAll weather-pack automotive style connections, sealed to prevent corrosion. Common ground.
• Lights and Safety
• LightingSide Lamps – Includes 2 rows of 3 – ¾” diameter LED bullet marker lamps each side; (3) amber, (2) red and (1) amber LED mid turn/marker lamp. | Nose Lamps – (2) High mounted amber ¾” diameter LED bullet marker lamps. | Standard High mounted Rear Frame Lamps – (5) red ¾” diameter LED bullet marker lamps on rear header. | Rear Tail Lamps– (6)-4” diameter, 6 diode LED lamps – all grommet mounted.
• Suspension23,000 lb. rated air ride suspension, 17” ride height 71 ½” or 77 ½” track. | Suspension subframe: Aluminum
• Wheels & Tires
• WheelsEight (8) 22.5 Aluminum Wheels
• Hub TypeCast ductile iron hubs with cast high-alloy, gray iron outboard mounted drums, hub piloted.
• Tires, Rear SpecificationEight (8) R123 R22.5 radials.
• Brakes
• Brake System Type16-1/2” X 7” “Q+” quick change brakes with 5.5” auto slacks and 30/30 spring brake chambers complying with FMVSS 121 – 4 sensor, 2 modulator anti-lock braking system with constant power supplied by center auxiliary pin. Exceeds the minimum requirements of FMVSS 121,S5.5
• FeaturesAccess System: Aluminum ladders on front and rear of trailer | Support Legs: Square legs, with roadside removable crank, low-profile 10''square cushion foot shoe, “No Lube” feature | Trap Operators: EZ Flow Hydraulic Trap with remote | Mudflaps: ½” Black heavy-duty rubber 24”W x 30”L. | Coatings: Black protective metal coating on all steel parts. | Single Hopper Formed .125 aluminum panels with side slope angle of 35.8 degrees, center and end panels with slope angle of 33 degrees, Ag tub design. Knockrail in upper and lower position on all sides of the hopper with wrap around structural corner connections.
• Construction MaterialPre-painted white .048” and .063” aluminum, corrugated on 6” centers. | Lower Rails-Aluminum 9-11/16” high extrusion. | Side Posts– Aluminum extrusion 1-3/4” z-posts on 12” centers. | Side Top Rails-Aluminum 5-5/8” x 6-1/4” extrusion. | Interior Lining-.048” aluminum. 45 degree slope at front and rear | Rear Panels: Corrugated pre-painted white .048” aluminum panels and extruded aluminum posts. | Nose Panels: Smooth pre-painted white .063” aluminum. | Front Corners: 6” radius, stainless steel | Front and Rear End Slope Panels-.080” aluminum supported by aluminum channel with Z shaped crossmembers, 33 degree slope angle. | Divider Panel – heavy duty panel that supports side walls, has deflector on top to disperse loading from directly impacting trap door and extends down to frame rail. .080 aluminum supported by bulkhead crossmembers.